Using the Lightning Wired Sensor with iPhone 15,16 and 17 (USB‑C Models)

Using the Lightning Wired Sensor with iPhone 15, 16, and 17 (USB‑C Models)

Apple’s iPhone 15, 16, and 17 series use a USB‑C connection, replacing the Lightning port found on earlier iPhone models. If you wish to use a Lightning Wired Sensor with these devices, a compatible adapter is required.

Required Adapter

To ensure proper function and compatibility, you must use the original Apple USB‑C to Lightning Adapter.
We do not recommend third‑party adapters (commonly found on Amazon or other retailers) as they have been found to cause connectivity or functionality issues with our sensors.

For detailed guidance, visit:
Using the Wired Sensor with iPhone 15–17 (USB‑C)

Setup Instructions

Follow these steps for best results:

1. Connect the adapter
   Plug the Apple USB‑C to Lightning Adapter into your iPhone.
   Tip: Remove any protective phone case if it obstructs the connection.

2. Restart your iPhone

   • Press and hold the power and either volume button until the power slider appears.

   • Slide to power off the device.

   • Wait a few seconds, then press the power button to turn it back on.

3. Reconnect the adapter and sensor

   • Remove the adapter, then reinsert it firmly into your iPhone.

   • Connect the Lightning Wired Sensor to the adapter.

   • A prompt may appear indicating accessory connection. If you don’t see it, that’s generally fine.

4. Open Inner Balance
   Launch the Inner Balance app and start a session to confirm the sensor is detected.